My 4 .063 Aluminum Sheets for the walls just arrived today. I had no idea how thick .063 was. These are 4'x10' sheets and are heavy. I did not plan on covering my walls and ceiling with all Aluminum but at $128 for a 4x10' sheet, this is now my plan. I will be checking with the supplier to see if there is a thinner sheet. It's going to be a pain trying to cut these.
I already have 1 FRP panel on the wall in my proposed sink area but I will taking that off and replacing with Aluminum.
www. flickr .com/photos/29163441@N06/5387668513/
What do you guys think, should I take the plywood off the walls and screw the aluminum sheets to the truck frame or leave as is? The former owner put the plywood on the walls. I'm going to keep it on the floor so that the vinyl adheres properly.
post edited by reese77 - 2011/01/25 15:45:27