O'Keefe
-
Total Posts:
4
- Joined: 12/1/2011
- Location: Lincolnshire , IL
|
Help Needed for Class Project
Thu, 12/1/11 4:55 PM
( permalink)
Hello, I'm a graduate student at Northwestern university. We are working on our capstone projects and I am at the phase where I need to start doing confirmation analysis for my product. It would help me a great deal if you would do me a favor and take this short survey: It should only take about 10 minutes. Thank you in advance. Sincerely, Scott
<message edited by O'Keefe on Thu, 12/1/11 5:15 PM>
|
|
|
|
O'Keefe
-
Total Posts:
4
- Joined: 12/1/2011
- Location: Lincolnshire , IL
|
Re:Help Needed for Class Project
Thu, 12/1/11 4:57 PM
( permalink)
Apparently n00bs aren't allowed to post links. Darn it. Well here's the link address. Sorry. https:// www. surveymonkey .com/s/ TKCDCKT remove the spaces please.
<message edited by O'Keefe on Thu, 12/1/11 5:03 PM>
|
|
|
|
CajunKing
-
Total Posts:
5299
- Joined: 7/6/2006
- Location: At the Bottom of White Lake
- Roadfood Insider
|
Re:Help Needed for Class Project
Thu, 12/1/11 6:49 PM
( permalink)
Hey O'Keefe Your survey is broken. The last question says to list all, but only allows you to select one answer. Tell us more about your dispenser.
<message edited by CajunKing on Thu, 12/1/11 6:50 PM>
|
|
|
|
O'Keefe
-
Total Posts:
4
- Joined: 12/1/2011
- Location: Lincolnshire , IL
|
Re:Help Needed for Class Project
Fri, 12/2/11 10:43 AM
( permalink)
CajunKing
Hey O'Keefe
Your survey is broken.
The last question says to list all, but only allows you to select one answer.
Tell us more about your dispenser.
hey King, Thanks for the heads up on the survey. Unfortunately since I have responses now I can't change to allow multiple selections. So, I removed the "select all that apply." About the dispenser, we are still in the early stages of development, but it is basically as described in the survey; a product that will dispense a set amount of the condiment as accurately as possible. Think pneumatic caulk gun. 
|
|
|
|
