Mobile Fryer oil containment

Author
mofood
Cheeseburger
  • Total Posts : 117
  • Joined: 2011/10/12 16:29:00
  • Location: SLC, UT
  • Status: offline
2012/06/26 14:15:35 (permalink)

Mobile Fryer oil containment

What is your method of dealing with your hot fryer oil in a mobile unit?
 
Drain it into a metal container? This would be a little dangerous while hot, but a good opportunity to filter the oil before every use.
 
Build a cover that seals the oil in the fryer, or at least minimizes sloshing, and prevents spillage on the road?
 
Wait until it cools (how long will that take for a 45lb fryer?), then strain/drain it into a container
 
Other methods?
 
#1

8 Replies Related Threads

    Dr of BBQ
    Filet Mignon
    • Total Posts : 3716
    • Joined: 2004/10/11 20:16:00
    • Location: Springfield, IL
    • Status: offline
    Re:Mobile Fryer oil containment 2012/06/26 15:01:30 (permalink)
    Wait until it cools (how long will that take for a 45lb fryer?), then strain/drain it into a container
     
    About 3 hours to cool but you can drain it in less than 3 hours.
    #2
    Chicnscoop
    Cheeseburger
    • Total Posts : 291
    • Joined: 2011/02/18 18:58:00
    • Location: Andover, CT
    • Status: offline
    Re:Mobile Fryer oil containment 2012/06/26 16:05:03 (permalink)
    It will need to cool to at most 300 degrees to be safe. Some plastics will melt at 350 so don't try to use any plastic cleaning brushes above that. Even at 300 the oil is quite scary to handle so I used to wait until it is 200 degrees . The oil drains through the filters better when warmer than room temp.
    #3
    THE WILD DOG
    Double Chili Cheeseburger
    • Total Posts : 1465
    • Joined: 2010/01/12 01:53:00
    • Location: Hunt Valley, MD
    • Status: offline
    Re:Mobile Fryer oil containment 2012/06/26 16:34:27 (permalink)
    design a cover, you are mobile. The least bit of movement will create a wave while driving, thus having oil everywhere. You probably won't wait around for it to cool down enough to drain. A friend of mine who has a fryer on her truck had a lid made with latches. That is what I am doing too. SCREW draining it every day and screw buying new oil every day too. lol
    #4
    Bistro a go-go
    Cheeseburger
    • Total Posts : 171
    • Joined: 2012/02/22 11:23:00
    • Location: Columbus, GA
    • Status: offline
    Re:Mobile Fryer oil containment 2012/06/26 16:53:13 (permalink)
    yep, the oil creates a seal around the lid. this was discussed here a month or so ago.
    #5
    Vic Cardenas
    Cheeseburger
    • Total Posts : 177
    • Joined: 2012/02/09 20:02:00
    • Location: Midvale, UT
    • Status: offline
    Re:Mobile Fryer oil containment 2012/06/26 17:35:10 (permalink)
    If you want to stop by the truck to see what AA did it's pretty nifty. I'm sure it would be something you could fab up easily. Are you going to be at the commissary any of these upcoming days? Oh, and I'm going to need your number for nefarious plotting/scheming and such.
    #6
    Buck & Vi's
    Double Cheeseburger
    • Total Posts : 832
    • Joined: 2010/04/19 15:48:00
    • Location: Marion county fl. dodging,snakes,spiders,roaches
    • Status: offline
    Re:Mobile Fryer oil containment 2012/06/26 17:48:24 (permalink)
    heres something like what I got.. I didnt get the wheels.
    http://www.etundra.com/Lo...-P12014.html?token=321|||0|10|7|1|0       it was a little pricy but I dont have to wait around for oil to cool.. I did always put this on a piece of cardboard tho too, I have a tile floor..........
    #7
    mofood
    Cheeseburger
    • Total Posts : 117
    • Joined: 2011/10/12 16:29:00
    • Location: SLC, UT
    • Status: offline
    Re:Mobile Fryer oil containment 2012/06/27 11:30:58 (permalink)
    Thanks for the replies. Good info. I'm started building a sealing lid.

    Vic, I'll be in touch
    #8
    THE WILD DOG
    Double Chili Cheeseburger
    • Total Posts : 1465
    • Joined: 2010/01/12 01:53:00
    • Location: Hunt Valley, MD
    • Status: offline
    Re:Mobile Fryer oil containment 2012/06/27 16:19:04 (permalink)
    can you post a pic vic ?
    #9
    Jump to:
    © 2014 APG vNext Commercial Version 5.1