Mobile kitchen build info

Change Page: < 123456789 | Showing page 9 of 9, messages 481 to 490 of 490
Author Message
Lost Nation
  • Total Posts : 69
  • Reward points : 0
  • Joined: 3/3/2011
  • Location: Essex Junction, VT
Re:Mobile kitchen build info - Thu, 03/3/11 7:16 PM
0
Thanks, this is a great thread with a wealth of information for a new build. I'm going to build a BBQ vending trailer as soon as the snow melts, hopefully before May.
 
Rich Decker
lostnationvt.com
Monkeytrot
  • Total Posts : 16
  • Reward points : 0
  • Joined: 8/20/2011
  • Location: Panama, XX
Re:Mobile kitchen build info - Tue, 08/23/11 1:34 PM
0
Thats quite a trailer chefbuba. .... Can i ask the length and width of that fine looking trailer
chefbuba
  • Total Posts : 1342
  • Reward points : 0
  • Joined: 6/22/2009
  • Location: Near You, WA
Re:Mobile kitchen build info - Tue, 08/23/11 3:20 PM
0
8.5 x 20

THE WILD DOG
  • Total Posts : 1291
  • Reward points : 0
  • Joined: 1/12/2010
  • Location: Hunt Valley, MD
Re:Mobile kitchen build info - Tue, 08/23/11 10:00 PM
0
that's what she said
kenny-31
  • Total Posts : 2
  • Reward points : 0
  • Joined: 11/8/2011
  • Location: sumas, WA
Re:Mobile kitchen build info - Wed, 11/16/11 1:16 PM
0
your walls look great.  is it stainless glued to plywood? 
DWags541
  • Total Posts : 124
  • Reward points : 0
  • Joined: 2/25/2012
  • Location: Eugene, OR
Re:Mobile kitchen build info - Sat, 02/25/12 9:30 PM
0
Hey Wild Dog,
Can you provide more info on this particular 12v fan option you mention? Link?
 
Thanks.
Dave
THE WILD DOG
  • Total Posts : 1291
  • Reward points : 0
  • Joined: 1/12/2010
  • Location: Hunt Valley, MD
Re:Mobile kitchen build info - Sat, 02/25/12 10:12 PM
0
I opted for a regular volt fan that was powered by my generator. I can still give you that link if you want for the non 12v
DWags541
  • Total Posts : 124
  • Reward points : 0
  • Joined: 2/25/2012
  • Location: Eugene, OR
Re:Mobile kitchen build info - Sat, 02/25/12 10:44 PM
0
Please do.
THE WILD DOG
  • Total Posts : 1291
  • Reward points : 0
  • Joined: 1/12/2010
  • Location: Hunt Valley, MD
Re:Mobile kitchen build info - Sat, 02/25/12 10:46 PM
DWags541
  • Total Posts : 124
  • Reward points : 0
  • Joined: 2/25/2012
  • Location: Eugene, OR
Re:Mobile kitchen build info - Sun, 02/26/12 1:50 AM
0
As far as AC fans go, was size your biggest concern for fitting into your hood? I've seen pics of your install.
 
I was at the local hardware store and saw an Air Vent Inc. brand (attic) fan. There were 3 different models all with varying CFMs. They ranged $60, $80, and $1000. I think the cheapest model blew out 1050 CFM. On amazon you can find it under Air Vent Inc. Gable Attic Ventilator 53315 for $54.
If you were to compare this one to the one you purchased and installed, what would be your analysis? Would the size of the Air Vent fan (about 18" sq) be the deal breaker?
Also, I didn't see a CFM listing for the fan you installed. Do you know what it is? I'll refer back to your install thread to see if I missed it.
 
-Dave
Change Page: < 123456789 | Showing page 9 of 9, messages 481 to 490 of 490