Vinyl Removal on Pushcart

Author
ProfitSee
Junior Burger
  • Total Posts : 24
  • Joined: 2012/10/27 09:49:00
  • Location: n/a
  • Status: offline
2013/01/17 06:32:05 (permalink)

Vinyl Removal on Pushcart

I have a pushcart that has the previous owner's logo on it. I was wondering how would I go about removing the logo myself? What item would I need to purchase from the store?
#1

3 Replies Related Threads

    Lost Nation
    Cheeseburger
    • Total Posts : 108
    • Joined: 2011/03/03 13:41:00
    • Location: Essex Junction, VT
    • Status: offline
    Re:Vinyl Removal on Pushcart 2013/01/17 06:49:42 (permalink)
    A heat gun (industrial hair dryer), it should peal right off then something to remove the residual adhesive (goof-off).
    #2
    ProfitSee
    Junior Burger
    • Total Posts : 24
    • Joined: 2012/10/27 09:49:00
    • Location: n/a
    • Status: offline
    Re:Vinyl Removal on Pushcart 2013/01/17 09:38:49 (permalink)
    Ill try that,thanks!
    #3
    Onesawb
    Junior Burger
    • Total Posts : 1
    • Joined: 2012/01/24 01:44:00
    • Location: Covington, GA
    • Status: offline
    Re:Vinyl Removal on Pushcart 2013/01/17 12:38:20 (permalink)
      Depending on the stickers size you may try a hair dryer if it's small or a heat gun if it's large. Be careful not to over heat or burn it . If there's residual glue left, there are several solvents you can use to remove it, lighter fluid, acetone gas, lacquer thinner almost any petroleum based product will disolve the adhesive. If the sticker has been on for an extended period of time it will have discolored the stainless steel, Home Depot sells a cleaner polish that when applied with a scotchbrite pad  will clean and repolish the whole panel and make it look like new
    #4
    Jump to:
    © 2014 APG vNext Trial Version 5.1