MARCO'S TRUCK BUILD

yes the sink fits great right where it is.

yes it is a perfect fit there.

ok time to get the tanks and water heater. i checked out plastic mart. good site they seam pricey.
any suggestions whould be greatly appreciated.

marco226
ok time to get the tanks and water heater. i checked out plastic mart. good site they seam pricey.
any suggestions whould be greatly appreciated.

 
 
http://www.randpcarriages.com/

GREAT sellers on Ebay... I've bought most of my stuff through them

Your floor looks great buddy.

thanks Jack hat means a lot

Hey hows the truck coming?
 

going well. i will post more picks soon. just waiting for the tanks. we are going to do the pluming next. i orderd the range, fryer, and a small glass door refrigerator on monday. how are you doing. the molding for the floor came in last wk from DIAMOND GEAR.

I love these threads Marco everything looks awesome I love the hood I'm looking at one very similar... What are the dimension of the hood?

1 - 5'0" X 42" X 24" / 1 2 " front model: EOLC

Wall Style - 430 Stainless Steel - where exposed

Weight 262 lbs. 4.50 Degree E T l Label (No charbroiler)

1 - Prewired Incandescent lights

1 10X10 Exhaust Collar for Top Loose

1 -

1 - SS Ceiling Skirt (Need Height)

1 - 60X 78 SS Back Wall Splash Panel

1 2 switch panel Prewired - RH End

C FM Requirements

Exhaust -1000 cfms @ .375 S.P

Supply - 800 cfms @ .125 S.P.

1 - UL -762 Exhaust Fan for above hood

1 18X 18 sloped Roof Curb
Y' Back Stand-Off Mounted (stand off adds to width of hood)V* hp 115 V 1 PH 5.80 amps

Perfect thanks for all the info dude, I'll be following your build intently.

finally the lp tank came today 12.5 gal

 

Nice! It's pretty similar to mine. How much did that run you?

That's a small tank....you could be filling that 3 x's a week.

it holds 12.5 gal. i think i will be big enough. if not i will get another.
well see. Vic i paid 506.00 deliverd.

Thats a sweet tank. I like how it has the gauge and quick fill. Thats going to work out great. Here is the website for the gray water tank grommet i got. http://www.dyersonline.com/rv-plumbing/rv-holding-tanks/holding-tank-fittings/ameri-kart-1-1-2-rubber-inlet-grommet.html

update the stove, fryer, and the glass door refrigerator came today

 

more

Very cool. Nice shinny equipment. Love it. LOL Nothing like NEW RESTAURANT EQUIPMENT!
 

thanks Jack seems things are moving slower than planed.
just want it to be nice and tight if you know what i mean

What size generator did you decide to go with and what will it be supplying power too?

It always takes longer than expected. But now you know even more than before what your customers are going through when they are trying to get a new B&M open, or doing a major remodel of a kitchen.Soon you'll be open and the money will start to come in.
 
I have been working my ass off (busy at the stand) and trying to find a way to get the price point down on my pork injector. I don't like nor never want to cheapen the quality or longevity (usefulness + lifespan)  of the end product but want to get the price point down to a (WOW what a deal). LOL
 
jack

Dude thats sweet! Love the stove! I'm jealous. lol Looks real good. I see what you mean about the wall by the hood. We'll have to meet up so i can check it out to see what he used.
 

do not know yet. i would like to get an rv generator...they are so expensive. i might have to go with an import

marco226


do not know yet. i would like to get an rv generator...they are so expensive. i might have to go with an import

What type of import?

duro max from i mperial  industrtrial generator make a 100000 watts for around 1000.00.
still not sure what to get yet.

Your truck is looking good.

THANK YOU VERY MUCH

So when will we get some updated pictures?

all of the equipment is on site.
I wanted everything in my build to be new.
i got an old sandwhich unit 48" will post a pick of that soon.
i just could not pass it up. the price was right FREE!
my team is busy at there shop. just waiting for them to install everything.
sinks, water tanks, water heater, pump, lp gas, the lp lines, stove, fryer glass door refrigerator,and the new FREE sandwhich unit.
i will post picks soon.next is looking for a generator. i want an rv one like MOFOOD has new 3000.00 or better.
i guess i will have break in to my piggy bank LOL.

Hey whats going on with the truck? anything new?

not really mike. i have all the equipment.
seems that the shop has been really busy this summer.
it should slow down for them soon.
so they should start up again working the truck soon.
i will post picks as soon as they start again.
thanks for asking.
 

marco226


not really mike. i have all the equipment.
seems that the shop has been really busy this summer.
it should slow down for them soon.
so they should start up again working the truck soon.
i will post picks as soon as they start again.
thanks for asking.

Yeah summer is busy for everyone. I havent got as much done as i would of liked too. But summer is almost done so your truck will be built in no time. We should meet up sometime.

up date finally they stared working on the truck this week. finished all the trim work on the inside.
now the fun really begins. water tanks, heater. th rest of the equipment. will post picks in the next couple of days.
i want to say TO ALL OF THE PEOPLE ON RF A VERY MERRY CHRISTMAS AND A VERY BUSY NEW YEAR.
i want to thank every one for your help and inPut you have given me. 

Marco,
That's good news I had been wondering how you were doing. Glad to hear your starting to make progress, but who here on RF has been giving you "inbut" ? LMAO  "inbut you have given me."

 i meant to say input. sorry. gee

100,000 WATTS!!! Wwwwhhhooooaaaaa I need to get that genny! ;) Lol.

Btw hope to see some updated pics soon!

BASE  MOLDING ADDED 
 

UPDATE

MORE TO COME

Isn't the refrigerator going to get hot next to the fryer? are you going to have a heat/grease shield?

i realy do not think it will get that hot to worry about.
i am thinking maybe put a heat shield on the refrigerator.
if anything to protect it from the grease.

Now your making some progress. Good deal. I don't know if the cooler will have to work harder or not because it's next to your fryer but a thin sheet of SS or Alum, will make the cooler wall on that side a lot easier to clean. If you think about it the next time you take a photo get outside and shoot from there so we can see the entire wall in one photo. Great job buddy. Congratulations I'll bet your getting excited and want to load the puppy with food and get started.

Dude everything is looking great! I have a lot of extra s/s sheets if u want to make a fryer shield.

thanks Jack. i am getting very excited.