Griddle Hood

Post
roadkillgrill
Cheeseburger
2012/07/03 22:56:42
Just thought I would share my griddle hood, It's made of Aluminum Valley Roll found at the lumber company. You will need to put TWO sheets over your shelf. The dropdown piece is actually in 3 pieces. the part you cant see is about 4 inches that stays wedged between the two sheets and is held together with plain ol duct tape. Heat does not affect the tape.
 

post edited by roadkillgrill - 2012/07/03 23:04:16
roadkillgrill
Cheeseburger
Re:Griddle Hood 2012/07/03 23:10:24
I've tried 3 pic servers, so I know it's not on the server end....well let's try it this way... UGHHHH
 
http://ipiccy.com/pic/imgjgSchu
Dr of BBQ
Filet Mignon
Re:Griddle Hood 2012/07/04 09:24:00
I don't understand what your doing here?
jack
Buck & Vi's
Double Cheeseburger
Re:Griddle Hood 2012/07/04 12:40:56
are you trying to put this over the grill to lessen the heat from the grill when not in use????
roadkillgrill
Cheeseburger
Re:Griddle Hood 2012/07/04 12:54:30
it traps the heat  so the fan sucks it right out and keeps the trailer cooler during none rush periods
Dr of BBQ
Filet Mignon
Re:Griddle Hood 2012/07/04 13:15:38
Cool (lol) so if someone were going to make a fancy one it would slide open like a patio door? Of course no one has room for that.
roadkillgrill
Cheeseburger
Re:Griddle Hood 2012/07/04 17:14:43
(pun)..... 
I wanted to build a roll top but one huge problem, when it's rolled open it would block access to the ventilation duct. It wasn't important enough to me to switch over to a down draft vent system. I only use it about a month each year.