Food Truck Flooring

Author Message
Noodles on the Loose
  • Total Posts : 57
  • Reward points : 0
  • Joined: 5/13/2011
  • Location: Wasilla, AK
Food Truck Flooring - Mon, 10/29/12 1:08 PM
0
I'm in the process of converting a '65 P30 and am looking for suggestions for the flooring.  The current floor of the box is metal, but is not in the best shape.  There are a couple areas of bondo and some rough spots.  We've prepped the surface with a heavy duty wire brush and removed anything loose as well as most of the paint that was on it.  My thought was to go with some type of epoxy coating, but not sure if any would adhere well or be thick enough to level out the rough spots.  Interior height of the truck is only just over 6', so I need to be careful of reducing that.  Any suggestions?  Thanks.

chefbuba
  • Total Posts : 1953
  • Reward points : 0
  • Joined: 6/22/2009
  • Location: Near You, WA
Re:Food Truck Flooring - Mon, 10/29/12 1:49 PM
0
Welded diamond plate over marine grade plywood, it's bullet proof.

buffy1711
  • Total Posts : 59
  • Reward points : 0
  • Joined: 6/20/2012
  • Location: Lincoln Park, MI
Re:Food Truck Flooring - Mon, 10/29/12 5:17 PM
0
My truck has an aluminum tongue and groove type of floor. We did just as you said to prep it and the epoxy worked great. It didn't level all the gaps but they are all sealed and its very durable. I have a pics but can't post them yet.

Noodles on the Loose
  • Total Posts : 57
  • Reward points : 0
  • Joined: 5/13/2011
  • Location: Wasilla, AK
Re:Food Truck Flooring - Mon, 10/29/12 8:16 PM
0
Chefbuba, New diamond plate would be great, I think it's going to be outside of my budget. 
 
Buffy, What brand/type of epoxy did you use?  Would you mind sending me pics by email?  noodles on the loose @ gmail.com   (without the spaces)
 
Thanks.
 

buffy1711
  • Total Posts : 59
  • Reward points : 0
  • Joined: 6/20/2012
  • Location: Lincoln Park, MI
Re:Food Truck Flooring - Mon, 10/29/12 11:35 PM
0
Diamond plate would be awesome. But not in my budget either. I sent you a picture of my floor. I should have sent a before pic too!, I think I will.

buffy1711
  • Total Posts : 59
  • Reward points : 0
  • Joined: 6/20/2012
  • Location: Lincoln Park, MI
Re:Food Truck Flooring - Mon, 10/29/12 11:42 PM
0
Chefbuba, why would you need your FLOOR bulletproof? What going on in WA?? Lol

Noodles on the Loose
  • Total Posts : 57
  • Reward points : 0
  • Joined: 5/13/2011
  • Location: Wasilla, AK
Re:Food Truck Flooring - Tue, 10/30/12 1:34 AM
0
Got both of the pics, and the floor looks great!

buffy1711
  • Total Posts : 59
  • Reward points : 0
  • Joined: 6/20/2012
  • Location: Lincoln Park, MI
Re:Food Truck Flooring - Tue, 10/30/12 9:29 PM
0
We used a self etching aluminum primer and Rustoleum garage floor epoxy. Worked out great.

chefbuba
  • Total Posts : 1953
  • Reward points : 0
  • Joined: 6/22/2009
  • Location: Near You, WA
Re:Food Truck Flooring - Tue, 10/30/12 9:48 PM
0
buffy1711


Chefbuba, why would you need your FLOOR bulletproof? What going on in WA?? Lol


Ever worked in a commercial kitchen?

RodBangkok
  • Total Posts : 385
  • Reward points : 0
  • Joined: 10/12/2008
  • Location: Bangkok Thailand, XX
Re:Food Truck Flooring - Tue, 10/30/12 10:06 PM
0
I've used a coating from these guys for industrial food areas, you add an aggregate to it to make it anti slip, works great and lasts a long time.  
http://www.arconsupplies....pdfs/Resucoat%20HB.pdf
Probably have a lot of these type coatings available in the states.  As far as diamond plate for a floor, better you than me to keep it clean, every try to squeegee diamond plate?

chefbuba
  • Total Posts : 1953
  • Reward points : 0
  • Joined: 6/22/2009
  • Location: Near You, WA
Re:Food Truck Flooring - Tue, 10/30/12 11:01 PM
0
I scrub my floor just about every day. Hot water, soap, degreaser, scrub with deck brush, rinse, squeegee, done.  I use a soft foam squeegee.
Takes all of five minutes, includes hooking up the hose and putting it away.

georgekey
  • Total Posts : 1
  • Reward points : 0
  • Joined: 3/18/2013
  • Location: 12360 Richmond Ave #1237, Houston, TX 77082
Re:Food Truck Flooring - Mon, 03/18/13 2:07 AM
0
Diamond plate is a good option but very expensive. If you can increase your budget then go for it.

 

<message edited by georgekey on Wed, 03/20/13 3:19 AM>

a.mckenna
  • Total Posts : 53
  • Reward points : 0
  • Joined: 2/13/2013
  • Location: Seattle, WA
Re:Food Truck Flooring - Mon, 03/18/13 10:52 AM
0
Garage floor epoxy works best, as it is designed to work with a aggregate. I have also used truck bed liner in a can. Put on a heavy coat, then dusted it with really fine sand, let it dry, put on another coat. Was pretty much impossible to destroy.

Senor Steve
  • Total Posts : 7
  • Reward points : 0
  • Joined: 3/9/2013
  • Location: somewhere, IN
Re:Food Truck Flooring - Mon, 03/18/13 8:33 PM
0
Are you using aluminum or stainless diamond plate?

DWags541
  • Total Posts : 174
  • Reward points : 0
  • Joined: 2/25/2012
  • Location: Eugene, OR
Re:Food Truck Flooring - Wed, 05/1/13 7:54 PM
0
My floor is metal, after pulling up thick plywood. I am tall so trying to limit the amount of layers put down on the floor so I have more headroom. I am opting for painting the existing metal if necessary, but I might even just leave the existing paint and use 1/2 inch anti fatigue mats down the center, which is what I would do regardless of my flooring.