Helpful ReplyBuilding Food Cart (Trailer) need to seal corners and seams

Author
WildPotato
Junior Burger
  • Total Posts : 2
  • Joined: 2013/03/23 14:58:00
  • Location: Eugene, OR
  • Status: offline
2013/03/23 15:08:44 (permalink)

Building Food Cart (Trailer) need to seal corners and seams

I recently bought a trailer that has been half converted to a food cart.  The electricity and walls have been redone, but the corners and seams aren't finished.  The walls are that white non-porous wall board that are in kitchens and baths.  I was wanting some sort of stainless steel corner or seam binding options, but the only thing I see online are corners and seams designed to fit stainless steel panels.  Which might work, but I was hoping for something I could easily screw in.
 
Any help would be appreciated, I have been searching the forums for a while and can't find anything on it.  
 
#1
Rcoy
Hamburger
  • Total Posts : 97
  • Joined: 2013/03/13 23:38:00
  • Location: Bremerton, WA
  • Status: offline
Re:Building Food Cart (Trailer) need to seal corners and seams 2013/03/23 18:54:55 (permalink) ☄ Helpful
I believe this page has what you need, but your local big box hardware store may as well.
marlite.com/frp-trim-and-installation.aspx 

post edited by Rcoy - 2013/03/23 18:56:35
#2
slammin
Cheeseburger
  • Total Posts : 104
  • Joined: 2009/08/09 18:23:00
  • Location: Fruita, CO
  • Status: offline
Re:Building Food Cart (Trailer) need to seal corners and seams 2013/03/27 19:18:31 (permalink) ☄ Helpful
Before you get too far, you should check with your local heath department to see what they require. No sense doing something that the HD will make you change,  
#3
WildPotato
Junior Burger
  • Total Posts : 2
  • Joined: 2013/03/23 14:58:00
  • Location: Eugene, OR
  • Status: offline
Re:Building Food Cart (Trailer) need to seal corners and seams 2013/04/16 12:47:25 (permalink)
HD said FRP would be fine.. thanks peeps.
#4
Jump to:
© 2014 APG vNext Commercial Version 5.1