Sink Size?

Author
Papa Dave
Junior Burger
  • Total Posts : 16
  • Joined: 2011/11/24 13:07:00
  • Location: Mead, WA
  • Status: offline
2013/08/06 01:50:10 (permalink)

Sink Size?

Talked with my HD rep this afternoon about my new cart.  All is good, except for the size of the sink.
I had planned on using a SS bowl 10" across and about 6 inches deep; the faucet is a high rise that will keep the faucet about 8" above the surface of the sink.  No go.
He wants to see something "9X9X9" to assure that my hands get 'down there'.
I've checked all over, and can't seem to locate anything like that.
Any suggestions.
I should add, the HD rep is a good guy and I don't want to cause any ripples.
Any ideas I could use?  Thanks in advance for any help.
 
Papa
 
#1

2 Replies Related Threads

    chefbuba
    Double Chili Cheeseburger
    • Total Posts : 2052
    • Joined: 2009/06/22 16:31:00
    • Location: Near You, WA
    • Status: offline
    Re:Sink Size? 2013/08/06 10:40:53 (permalink)
    Is this a hand wash sink? If so, there is no reason for it to be 9" deep.
    From the WA state retail food code:
    No mention of a 9" depth requirement.
    .

    HANDWASHING SINK
    means a lavatory, a basin or vessel for washing, a wash basin,
    or a
    PLUMBING FIXTURE
    especially placed for use in personal hygiene and designed
    for the washing of hands.
    0
    5210
    Design, construction and installation
    --
    Handwashing facility, installation (2009 FDA
    Food
    Code 5
    -
    202
    .
    12
    ).
    (1)
    A
    HANDWASHING SINK
    must be equipped to provide water at a temperature of at least
    100
    °
    F (38
    °
    C) through a mixing valve or combination faucet.
    (2)
    A steam mixing valve may not be used at a handwash sink.
    (3)
    A self
    -
    closing, slow closing or metering faucet must provide a flow of water for at least
    fifteen seconds without the need to reactivate the faucet.
    (4)
    An automatic handwashing facility must be installed in accordance with manufacturer's
    instructions.
    (5)
    H
    ANDWASHING SINKS
    in
    FOOD ESTABLISHMENTS
    must be adequately sized to allow a
    FOOD
    EMPLOYEE
    to wash both hands simultaneously.
    post edited by chefbuba - 2013/08/06 11:00:55
    #2
    CajunKing
    Sirloin
    • Total Posts : 6559
    • Joined: 2006/07/06 19:49:00
    • Location: Live at Saint Clair
    • Status: offline
    Re:Sink Size? 2013/08/06 13:33:46 (permalink)
    You might ask him what he would suggest because most small hand sinks are well within the 9x9x9.
     
    Prima has one that is 9x9x5. Unless he wants it a bit deeper than the rounded 6 inches
     
    what about a 6 inch deep hotel pan?
     
    #3
    Jump to:
    © 2014 APG vNext Commercial Version 5.1