ProfitSee
-
Total Posts:
24
- Joined: 10/27/2012
- Location: n/a
|
Vinyl Removal on Pushcart
Thu, 01/17/13 6:32 AM
( permalink)
I have a pushcart that has the previous owner's logo on it. I was wondering how would I go about removing the logo myself? What item would I need to purchase from the store?
|
|
|
|
Lost Nation
-
Total Posts:
98
- Joined: 3/3/2011
- Location: Essex Junction, VT
|
Re:Vinyl Removal on Pushcart
Thu, 01/17/13 6:49 AM
( permalink)
A heat gun (industrial hair dryer), it should peal right off then something to remove the residual adhesive (goof-off).
|
|
|
|
ProfitSee
-
Total Posts:
24
- Joined: 10/27/2012
- Location: n/a
|
Re:Vinyl Removal on Pushcart
Thu, 01/17/13 9:38 AM
( permalink)
Ill try that,thanks!
|
|
|
|
Onesawb
-
Total Posts:
1
- Joined: 1/24/2012
- Location: Covington, GA
|
Re:Vinyl Removal on Pushcart
Thu, 01/17/13 12:38 PM
( permalink)
Depending on the stickers size you may try a hair dryer if it's small or a heat gun if it's large. Be careful not to over heat or burn it . If there's residual glue left, there are several solvents you can use to remove it, lighter fluid, acetone gas, lacquer thinner almost any petroleum based product will disolve the adhesive. If the sticker has been on for an extended period of time it will have discolored the stainless steel, Home Depot sells a cleaner polish that when applied with a scotchbrite pad will clean and repolish the whole panel and make it look like new
|
|
|
|
