The most memorable local eateries along the highways and back roads of America
Sign In | Register for Free!
Restaurants Recipes Forums EatingTours Merchandise FAQ Maps Insider

 Just a few food truck questions

Author Message
jeffwllms

  • Total Posts: 19
  • Joined: 4/18/2013
  • Location: Fort Worth, TX
Just a few food truck questions Wed, 04/24/13 11:52 AM (permalink)
Hello, all.  We are looking to purchase a truck to convert into a food truck for a non-profit that will be feeding the hungry and food insecure.  We have come across a few good deals and there may be an option of getting a truck donated.  The conversion will be done by qualified people hopefully donating there time, but we haven't put together the team yet.  We are looking for some pointers on picking a truck so that we don't cause problems for ourselves during building out.  
 
One of the thing that I have seen in every truck the we have looked at (about 20 trucks) is some sort of access in the floor.  It is located basically in the center of the box toward the back half.  In the build pictures on this site I haven't seen any trucks that seem to have this (from what I can tell in the pictures).  Have any of you seen these how have you delt with them in your trucks.
 
Also every truck we have looked at see,s to have a ceiling height of just over 6 ft.  So unless we find something else we will be needing to raise the ceiling.  Has anyone gone through the process?  We are really trying to estimate a rough cost of doing it since I need to get board budget approval.  It would be great to know if any did it themselves or with the help of a buddy that does metal work, etc and what material cost were etc. for that.  As well if anyone just had a shop handle it and what did you pay.
 
Also aside from shops that specialize in building food trucks what kind of shops are capable of doing this type of work.  The shops that specialize in food trucks seem to be pretty pricey.  I am thinking a RV shop should also be more than capable.
 
Thanks
<message edited by jeffwllms on Wed, 04/24/13 12:44 PM>
 
#1
    Uncle Groucho

    • Total Posts: 207
    • Joined: 11/2/2010
    • Location: Floyd County, IN
    Re:Just a few food truck questions Wed, 04/24/13 5:32 PM (permalink)
    Look for a Sheet Metal Workers Local in your area, they may be able to help you or steer you in the right direction for your fabrication questions or materials.
     
    #2
      cue

      • Total Posts: 49
      • Joined: 10/4/2012
      • Location: Mid-West
      Re:Just a few food truck questions Wed, 04/24/13 8:33 PM (permalink)
      I am having a shop in Houston, Tx build mine.  I just dont have the time. I will have about $30,000 in mine complete and ready to go to work.  Thats the cost of the truck, build out,  equipment,  wrapped in vinyl and a expensive diesel generator.  I bought a used FEDEX truck and took it to them and they are going to outfit it for me. I spent $4,000.00 on the truck.  It is a 1988 International with a Utilimaster body.  Body is in great condition.  430,000 miles on the truck.  Under 100,000 miles on a rebuilt engine and transmission.  They will also work with you on finding and using used equipment to keep the cost down.  Hope that helps
       
      #3
        BelCibo

        • Total Posts: 155
        • Joined: 11/20/2012
        • Location: Marsing, ID
        Re:Just a few food truck questions Thu, 04/25/13 1:08 PM (permalink)
        cue


        I am having a shop in Houston, Tx build mine.  I just dont have the time. I will have about $30,000 in mine complete and ready to go to work.  Thats the cost of the truck, build out,  equipment,  wrapped in vinyl and a expensive diesel generator.  I bought a used FEDEX truck and took it to them and they are going to outfit it for me. I spent $4,000.00 on the truck.  It is a 1988 International with a Utilimaster body.  Body is in great condition.  430,000 miles on the truck.  Under 100,000 miles on a rebuilt engine and transmission.  They will also work with you on finding and using used equipment to keep the cost down.  Hope that helps

        That price sounds really good.  I'll have around $25k in mine and I did all the work myself.
         
        #4
          jeffwllms

          • Total Posts: 19
          • Joined: 4/18/2013
          • Location: Fort Worth, TX
          Re:Just a few food truck questions Thu, 04/25/13 10:11 PM (permalink)
          Thanks, I will start checking out some shops.
           
          #5
            jeffwllms

            • Total Posts: 19
            • Joined: 4/18/2013
            • Location: Fort Worth, TX
            Re:Just a few food truck questions Thu, 04/25/13 10:13 PM (permalink)
            Cue, that seems like an amazing price.
             
            #6
              Online Bookmarks Sharing: Share/Bookmark

              Jump to:

              Current active users

              There are 0 members and 2 guests.

              Icon Legend and Permission

              • New Messages
              • No New Messages
              • Hot Topic w/ New Messages
              • Hot Topic w/o New Messages
              • Locked w/ New Messages
              • Locked w/o New Messages
              • Read Message
              • Post New Thread
              • Reply to message
              • Post New Poll
              • Submit Vote
              • Post reward post
              • Delete my own posts
              • Delete my own threads
              • Rate post

              2000-2014 ASPPlayground.NET Forum Version 3.9
              What is Roadfood?  |   Privacy Policy  |   Contact Roadfood.com   Copyright 2011 - Roadfood.com