The most memorable local eateries along the highways and back roads of America
Sign In | Register for Free!
Restaurants Recipes Forums EatingTours Merchandise FAQ Maps Insider

 Concession window question

Author Message
cajam124

  • Total Posts: 8
  • Joined: 10/28/2013
  • Location: Cocoa Beach, FL
Concession window question Sat, 11/2/13 4:39 PM (permalink)
Hello,
My partner and I have a 1998 Grumman 16' step van that we're converting into a food truck.  Regarding the window: do I need a mull bar considering our desired window width of 6' (and height of 3')?
Thanks!
 
#1
    Midnights

    • Total Posts: 188
    • Joined: 10/13/2013
    • Location: Denver, CO
    Re:Concession window question Sat, 11/2/13 8:51 PM (permalink)
    That depends. You might need one if you plan on taking two windows from Lowes or HomeDepot and retrofitting them into your opening. They do make 6'x3' windows specifically for food trucks that don't require a mull bar. Here are two on eBay:
    http : // www . ebay . com/itm/Concession-Window-Trailer-Food-Truck-Serving-Window-SIX-FOOT-/111191258658
    http : // www . ebay . com/itm/Concession-Window-W-Glass-and-Screen-6-FOOT-/111204620439
     
    #2
      cajam124

      • Total Posts: 8
      • Joined: 10/28/2013
      • Location: Cocoa Beach, FL
      Re:Concession window question Mon, 11/4/13 6:30 PM (permalink)
      Thanks Midnights for your reply.  I talked with my business partner today.  We decided on a two-window system (with mull bar separator); each window measing 48" height and 36" width for a total width of 72".  Each window has one pane that slides. My two questions are:
      1) at what height from the ground is best for the bottom of the service window? (for best serving customers at their level)
      2) is it best to buy windows that open from bottom to top? or slide open from side to side?
       
      Thanks!
       
      #3
        fishscale28

        • Total Posts: 224
        • Joined: 2/21/2013
        • Location: Fort Lauderdale, FL
        Re:Concession window question Mon, 11/4/13 11:39 PM (permalink)
        Its a matter of preference for up or down and side to side...I'm tall and all my equipment is at least 36" on the inside of the truck so I had to put the windows 36" up from the floor inside the truck.  Works ok BUT its a bit high for anyone standing outside the truck...or anyone who is short.  I like it because it fits for me and because I can easily lean over the equipment and reach, etc. but its a stretch for anyone who isn't tall.  If you're not planning on putting coolers, etc in front of the windows and are just going with countertops then I'd definitely try and get them as low and reachable from the ground as you're comfortable with.  Remember though-the lower they are the more of an awkward reach and challenge it will be for you.  Likewise the taller they are.  
         
        Mine slide side to side and it is tall...but its manageable for me and the guests
         
        #4
          Online Bookmarks Sharing: Share/Bookmark

          Jump to:

          Current active users

          There are 0 members and 2 guests.

          Icon Legend and Permission

          • New Messages
          • No New Messages
          • Hot Topic w/ New Messages
          • Hot Topic w/o New Messages
          • Locked w/ New Messages
          • Locked w/o New Messages
          • Read Message
          • Post New Thread
          • Reply to message
          • Post New Poll
          • Submit Vote
          • Post reward post
          • Delete my own posts
          • Delete my own threads
          • Rate post

          2000-2014 ASPPlayground.NET Forum Version 3.9
          What is Roadfood?  |   Privacy Policy  |   Contact Roadfood.com   Copyright 2011 - Roadfood.com